What a Site Audit Deliverable Actually Is
A site audit deliverable is the document a client receives at the end of an audit. It is not the raw output of a scanning tool. A raw scan lists everything it found, in the order it found it, in language meant for the person running the tool. A deliverable translates those findings into something a client can understand, judge, and act on.
That distinction is where many agency audits fall down. The audit work itself may be thorough, but if the client receives a long list of errors with no explanation of what matters, what it costs them, or what happens next, the report sits unread. A good deliverable answers four questions for the client: what did you check, what did you find, what matters most, and what should we do next?
The Parts Every Client-Ready Deliverable Needs
A deliverable does not need to be long, but it does need to be complete. The sections below cover what a client needs in order to make a decision.
1. A short summary, written for a non-specialist
Start with a summary of no more than a few paragraphs. State what was audited, the overall condition of the site in plain language, and the one or two findings that matter most. A business owner should be able to read this section alone and understand whether their site has a small set of fixable problems or a deeper problem that needs a bigger decision.
Keep the summary honest. If the site is broadly sound with a handful of faults, say so. A summary that makes every site sound broken destroys trust the moment a client gets a second opinion.
2. Findings, each with evidence
Every finding should name the problem, show where it occurs, and explain why it matters. "Missing meta descriptions" on its own is a label, not a finding. "Twelve pages, including the services and contact pages, have no meta description, so search results show an automatic snippet instead of a message you control" is a finding a client can act on.
Evidence matters because it makes the finding checkable. Give the page address, and where it helps, a short description of what a visitor or a search engine sees. A client who can verify one finding for themselves is far more likely to trust the rest of the report.
3. Priorities, not just a list
A list of fifty findings, all presented with equal weight, is not a plan. Group findings by priority: what is broken now, what is holding the site back, and what would be nice to improve later. A broken contact form outranks a missing image description, and a page that search engines cannot reach outranks a page with a slightly long title.
For each priority group, say what fixing it would change for the business — enquiries that currently fail, visitors who currently leave, or pages that currently cannot be found. Clients approve work when they understand the consequence of leaving a problem alone, not when they are shown a longer list.
4. Recommendations with a next step
Every significant finding should lead to a recommendation, and every recommendation should lead to a next step. "Fix the broken links" is a task for nobody in particular. "Repair the six broken links on the services pages, starting with the pricing page link that visitors use most" is work a client can approve and an agency can price.
Where a recommendation needs a decision from the client — a redesign, new content, or a change of platform — say so explicitly, and separate it from fixes that can simply be done. Clients should never have to guess which items in a report are quotes waiting for approval and which are routine fixes.
5. What was checked, and what was not
Close the factual part of the deliverable with a clear statement of scope: which areas were reviewed, and which were not. If the audit covered technical structure, on-page basics, and speed, but did not review content quality, conversion paths, or competitors, say so. A client who later discovers an unreviewed problem will judge the report by whether it claimed to cover it.
| Section | What it contains | Why the client needs it |
|---|---|---|
| Summary | Overall condition and the findings that matter most | To understand the situation without reading the whole report |
| Findings with evidence | Each problem, where it occurs, and why it matters | To verify the work and trust the conclusions |
| Priorities | Findings grouped by urgency and business impact | To decide what to fix first |
| Recommendations | Specific next steps for each significant finding | To approve work and know what it will take |
| Scope | What was checked and what was not | To avoid misunderstandings later |
What to Leave Out
A deliverable is weakened by what it includes unnecessarily, not only by what it omits. Leave out raw tool output pasted without explanation, scores with no findings behind them, and jargon a client cannot act on. A single unexplained score, or a page of technical terms with no translation, makes the whole report feel like it was written for someone else.
Also leave out findings you cannot defend. If a tool flags something you do not understand, check it before it reaches the client, or leave it out and note that the area needs a closer look. One finding a client proves wrong casts doubt on every finding they have not checked.
How to Present the Deliverable
Format matters as much as content. A deliverable should be easy to skim, easy to share inside the client's business, and easy to return to later. Short sections with clear headings, one finding per item, and plain language throughout will serve a client better than a long narrative, however well written.
Keep the document itself as the record. A verbal walkthrough is valuable, and it is worth offering one, but the client should be able to re-read the findings and recommendations afterwards without relying on memory. If findings are delivered only in a call or a slide deck, they are easily lost when the person who attended the call moves on.
A Simple Structure You Can Reuse
For agencies producing audits regularly, a consistent structure saves time and makes each report easier for repeat clients to read. A workable order is:
- Summary: what was audited, the overall condition, and the findings that matter most.
- Findings by area: technical setup, on-page structure, speed and mobile behaviour, and content basics — each finding with its page and its consequence.
- Priorities: broken now, holding the site back, and improve later.
- Recommendations and next steps: what you propose, what needs the client's decision, and what happens first.
- Scope and limits: what the audit covered, and what it did not.
Using the same structure every time also makes your own work comparable. When a client returns for a second audit, a matching structure shows clearly what has improved and what has not, which is a stronger basis for the next piece of work than a new format every time.
Common Mistakes in Audit Deliverables
The most common mistake is mistaking volume for value: a longer report feels more thorough, but a client who cannot find the important findings will treat the whole document as noise. The second is presenting every finding as equally urgent, which leaves the client with no basis for deciding anything. The third is writing for the tool rather than the reader — copying technical labels and scores into the report without translating them into business consequences.
All three mistakes have the same fix: write the deliverable as if the reader has ten minutes, a budget decision to make, and no technical background. If a section does not help that reader decide, shorten it or remove it.
Turn Findings Into a Report Clients Can Use
A good deliverable starts with a solid audit. Run a free audit of the site first, read the findings as your client would, and decide which ones you can explain and defend. Then turn the findings that matter into a structured report with the report generator, organised around the summary, findings, priorities, and next steps above. Start at AuditPitch and judge the deliverable by one test: could a client read it, understand what matters, and approve the next step?